CH Pro Throttle Calibration Issue
Page 1 of 1

Author:  -oskar [ Thu Sep 10, 2015 3:23 am ]
Post subject:  CH Pro Throttle Calibration Issue

Hoping someone has some advice on how to properly calibrate a CH Throttle.

I have an annoying ongoing issue where my CH throttle will not stay at 100%. Full throttle will get me 100%, then the throttle falls back to 95% or so at random times. Seems worse with certain FMs like buffs and the p38. I have tried to calibrate and re-calibrate the throttle with no success. I even programmed a button on my Fighterstick to tap back to 100% when it drops back less than 100%.

Didn't have this problem with my Saitek throttle. Anyone with a CH throttle having same issue? Suggestions?

Many thanks,


Author:  -oskar [ Sat Sep 12, 2015 3:30 pm ]
Post subject:  Re: CH Pro Throttle Calibration Issue

Thanks Dobs,

Guess there is some comfort in knowing I'm not alone on the problem.


Author:  bollok [ Wed Nov 18, 2015 2:38 pm ]
Post subject:  Re: CH Pro Throttle Calibration Issue

Hello Oscar,
Just seen this checking through unread posts.

I had same issue before.
What I used to do was calibrate it just shy of actual max throttle movement.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group